Mobility

Crutches with adjustable elbow support especially designed to suit most user size and weight requirements. Easily adjustable with a push button, fully pivoting arm cuff. Adjustable elbow support height: 8.5 - 11.25 in (22-29 cm). Height adjustment between handle and floor: 28.25 - 37.75 in (72-96 cm). Lightweight 18.7 oz (530g) per crutch. Weight capacity: 330 lbs (150 kg) per crutch. Colour: white. For replacement crutch tips order PS-14A3011. Does not contain Latex. Sold as a pair.

This height adjusting gas cylinder can be used to transform a manual Bure StandTall Walker into a stepless Automatic Height Adjustment Walker.

Manufactured in Sweden utilizing a user-friendly design that does not confine the patient. This walker is only 32 in (81 cm) wide and is able to go through most home doorways. The handles are ergonomically designed to be adjustable in every direction for optimum patient adaptation. The Standtall Walker has anatomical arm cushions that are angled downwards to provide relief for the shoulders, arms and neck and shift the focus to larger muscles in the legs and chest. This improves stability and makes the walker easier to steer.

Here is a very useful back pack made of heavy weight black cordura nylon like a hiker's pack. Size 14" wide x 15" deep (36 x 38m) with two outside pockets. Nylon straps for hanging over wheelchair handles. All flaps close with Velcror, easily opened especially if there is a dexterity problem.

A user friendly cup holder for use while in a wheelchair. Ideal for those with limited hand function. Fastens securely to your wheelchair with little chance of it being knocked off.

A sturdy plastic cup holder which accommodates a coffee mug with handle. It attaches easily to most wheelchairs. Two attachment clips to fit 7/8" and 1" (22 and 25 mm) round tubes are included. Once the clip is installed the cup holder alone can be easily removed. No tools required.

This is without a doubt the best drink holder we have ever seen. It folds flat when not needed, flips down for use. It has adjustable drink holders to accommodate everything from small cans to 32 oz. bottles. The mounting system fits 0.75 to 1 in (2 to 2.5 cm) round tubes, plus adjusts for different angles on the tube. Size: 3.75 in width x 4 in in height (9.5 X 10 cm).

A flat tray made of 1/4 in (0.64 cm) transparent Lexan with a molded edge trim all around the edge. The edge is non marring and wide enough to protect frail skin from abrasion. Mounts with our slide-on system. Fits over the arm rests of 16 and 18 inch (41 and 46 cm) wheelchairs. Tray measures: 18 x 24 in (46 X 61 cm).

Parsons Fleece Armrest with Pouch will not only add fleecy comfort for your arms but also a storage space to boot! Pocket measures approximately 8" (20cm) across and is 6" (15cm) deep. Sold in pairs.

A heavy weight black Cordura nylon pack, similar to our model 16C005 but with zipper closures with pull cords and tabs for easy zipper use. Nylon straps for hanging over wheelchair handles. One large pocket and two outside smaller pockets.

This handy pouch provides a convenient storage compartment under the chair and is accessible from the front by the wheelchair user. Made of durable dark blue nylon. Fastens securely and easily with buckles.

A generous size rain cape to protect the person seated in a wheelchair and the wheelchair as well. Has a Hook & Loop closure that can be opened and closed from the inside as well as the outside, also has a double thickness hood for warmth. One size fits all. Made of 100% nylon - machine washable.

This garment is designed to be as easy to put on as putting a blanket around the shoulders. The difference is that the wearer can feel fully dressed. It is so easy to put on and feels warm just where needed. The high collar can be turned up to protect the neck and ears when transferring to the car, without messing the hair. The overlapping front is snug and cozy. Hook & loop fastener at neck keeps draft from the front of the neck.